6" K Watertite Gutter Machine

Standard Equipment:
 - Straight blade guillotine
 - Seven station aluminum box
 - Emergency shutdown switch
 - Easy adjust entrance guides
 - Two quick release runout stands

Standard Upright System:
 - 2 spool turnstile upright & 1 aluminum spool
 - New aluminum spools less than half the weight of steel spools.
 - Weight distributing upright system distributes the weight of the coils to the floor of the vehicle, not the gutter machine itself.

Dimensions:
 - Top of spools to the bottom of gutter machine 52”. Width 25”. Length 127” with straight blade guillotine. 129” ¾ with front pull guillotine.

Construction:
 - 3/8” steel frame welded on a jig fixture for accuracy. Fully enclosed with 7 gauge steel sides. All parts individually painted prior to assembly.
 - Drive/Forming

Rollers:
 - Fourteen drive forming rollers – 8 bottom, 6 top. Rollers are 10-18 steel plated, with .002 industrial hard-crome.

Weight:
 - 1,655 lbs.

Power:
 - ¾ HP, high torque sealed motor. 1 HP reduction gear. Gutter machine plugs directly into 110-120V outlets.

Production:
 - Approximately 35 feet per minute

Recommended Materials:
 - 11 ¾” to 12 3/8” wide
 - Aluminum - .032 Maximum Gauge
 - Painted steel – 26 Maximum Gauge
 - Galvanized steel – 26 Maximum Gauge
 - Copper – 16 oz. ¾ hard Maximum Gauge

Options:   
 - Front pull guillotine
 - Additional runout support stands
 - 220 volt/50hz.
 - Single, double or triple spool upright available
 - Machine mount cradle
 - 12 volt DC power
 - Trailer riser pad