A single-bead gutter has a decorative beaded edge on one side. There are also double bead gutters, which have beaded edges on both sides and reverse beads, which is a newer style that uses more conventional hanger brackets. These gutters are designed to add aesthetic appeal but may not be as durable as K-Style gutters in harsh climates.

Traditional single bead gutters have the bead rolling to the outside of the gutter where reverse bead gutters have the bead rolling to the inside of the gutters.  From the ground that has a very similar appearance that only a discerning eye could differentiate.  The newer reverse bead gutter has a couple of benefits over the standard traditional bead gutters.  First, the reverse bead gutters can utilize a coil that is only painted on one side where traditional bead gutters require both sides of the coil to be painted.  Reverse bead gutters can also utilize hidden hangers that have become the go to choice for k style gutters which cuts down on material and labor costs.

Half round gutters provide an architectural accent that is more representative of traditional times.  The rounded bottom does not allow as much water to sit in the bottom of the gutter so they will drain the water faster.  K style gutters are more expensive and are more labor intensive then half round gutters.

To properly install gutters, you will need the gutter materials, end caps and drop outlets, gutter flashing, sealant, hangers and/or spikes, a ladder, measuring tape, and some type of snips or cutters that can cut aluminum. You should gather all the materials and tools before installation so that you have everything together. If you aren’t sure about any steps in the process, you should consider hiring a professional instead.

Aluminum is a durable and cost-effective material for gutter systems, making it a popular choice for many homeowners. You will want to explore all the options to ensure you choose what you like best. However, you can guarantee that aluminum gutters will provide years of durable use when properly installed, and for a relatively low price.

Prices vary, especially so because there are several types of gutter hangers that vary in costs. A typical cost of half round aluminum gutters is $25-35/linear ft.

This will depend on your application and whether you have a flat fascia, an angled fascia, crown molding, exposed rafter tails or if the system is free hanging (supported from the roof). Be sure to use the correct hanger for your particular application.

No, aluminum half round gutters should be sealed with an elastomeric grade gutter sealant.

This will depend on your application and whether you are in snow country.  Typically the hanger brackets get installed on 24" to 32" centers.

Half round gutters are much more difficult to install then K style gutters.  But if you have the patience and the skillset to use a pair of tin snips, a level, a screw gun and can read a tape measure then you should be able to install them.